I am parting out my 06 yfz 450 ive tried selling the bike and no one was interested. All of my parts are in good condition and work great. The bike was recently rebuilt and didnt have time to ride so all of the powdercoat is fresh ive only ridden it twice around the yard and it ran great. All of my prices are OBO and i will start putting parts on ebay next week but will pull them if someone wants to buy them. If anyone wants pictures of a part let me know and ill gladly email you pictures I am going to start tearing it down tonight. I prefer paypal.

Gusseted and Candy Blue Powder Coat Frame and Subframe(Steering Flag is bent but just makes getting the steering stem in a little harder and a front bumper mount is torn off) – 500

Motor ( I just replaced the rings and gaskets on the motor and runs great)

Nmotion Full exhaust 9 inch can - 300

Houser +1 Steering Stem with handlebars and mount – 125

LSR DC-4 Longtravel A Arms fresh powder coat candy lime uppers and candy blue lowers. The ball joints have only one season on them and the tie rod ends and bushings are all new. – 600

Fox Evol 18.25 inch Long Travel Shocks with two air pumps– 900

Douglas wheels and Kenda MX front tires 100% tread – 150

Douglas Beadlock wheels and ITP holeshot mxr4 60% tread – 175

Stainless steel front brake lines – 30

AC Pro Peg nerf bars dropped 2 inches – 100

Big airfilter kit with two Uni filters adapter and airbox – 50

Carb – 150 shipped

Blue Front/Tank/ Side Plastic/ Rear Plastic - 175

Electrical System – 65 shipped

Back Hubs – 20 shipped

Disk Brake with Hub – 20 Shipped

Stock Axle - 70 shipped

Seat with K&K Cover - 80 shipped

Gas Tank – 25 shipped

Clutch Lever and Cable – 25 shipped

Brake Petal, Fluid Bottle - 25 shipped

Honda Thumb Throttle and cable - 25 shipped

Front Brake Lever - 35 shipped

Brake Caliper - 40 shipped

Overflow Bottle – 7.50 shipped

Coolant Bottle - 7.50 shipped

Radiator – 125 shipped

Front Calipers – 30 shipped

Front Hubs – 30 shipped

Stock Linkage – 20 shipped

Stock Bumper – 10 shipped

Brake Rotor – 20 shipped







Not for sure if these pictures will work or not but will fix it if there not.

How much for the rear carrier hub and caliper?

PM Sent

how much for the subframe alone, and is there anything wrong with it??

80 shipped for the subframe the only thing wrong with it is the inserts for the grab bar have come loose and the threads still have some powdercoat in them they just need to be re threaded and they will be fine but its not bent and has no cracks in it.

Update: I didnt put the swing arm on there but its got fresh candy blue powder coat on it and thats with out the carrier for 100. And the front calipers have been sold.

I need to get rid of these parts come on.

Any pics of the Honda thumb throttle? What's it off of?
I'll take it if it's in good shape.

Heres the pics of the throttle.

Looks like that'll work for what I want!

I'll pm ya in a few minutes.

Thanks!

Any idea on how much for the engine?

Update: The rear caliper, carrier, rear brake hub, front brake lines, front brake line clamps, and killswitch have been sold. Still have a lot of parts just let me know if you need anything.

do you still have the stem... Is it a +1 for an 06 and what size clamps are on it... 7/8 or 1 1/8.... Is it anti vibe clamps

Finally got the funds sent for the Honda throttle.

Thanks!

The throttle will be shipped out tomorrow.

Nannyyfz the stem is +1 for an 05 and it has 1 1/8 clamps and yes they are antivibe.

Got the throttle today! Thanks!

Question about the cable; Do you know what it was originally for/off of?

It won't fit my Raptor with the stock carbs, BUT, it sure looks identical to the "special" cable I had to order to fit my other Raptor with 39mm FCR carbs. A buddy of mine has my FCR's right now so I can't compare the cables, (since my bike I had them on was blown up but almost back together now!). But it sure looks the same.
If it's a stock cable off of somethin it'd sure be handy to know. Wouldn't have to order anymore "special" cables that way!

Thanks again!

Its a stock YFZ cable

Cool! That's good info to know!

Thanks again.

Bump for ya!

pics of atrbox and filter to jsvo5695@mchsi.com

do you still have the carb ? is it stock ? ready to buy asap paypal and everything please let me know, PM if thats easier

do u still have the motor and how much send pics to tywer250@yahoo.com thanks

The last time this guy was on was Jan 24th, 2009.....

Wouldn't expect to here from him.