I am running LSR DC4 lt a arms and i am wonder if i will be to wide to run gncc with some 4:1 off set wheels. with 3:2 i am at 49-50 inches, any one know how wide i will be with some 4:1 offset wheels

you should be fine. you should be about 1 inch wider than stock

I like to be around 46 inches wide

I tried running my YFZ with DC-4's and 4:1 wheels through the woods and it sucked! BAD! I would not recomend it.

iagree with xc bob 45.5 to 46 seams to be the magic number. i ran houser +2 for a while and they made the front end 48in wide. it slowed me down to much getting into the tight stuff. xc rules state the track can be no less than 48in wide at any point.

well for now i got it down to 48, i like my a arms too much to part with them, if this keeps me slow in places i will just have to make up for it some where else. i do drag race so i will aim to get the hole shot

You could get some XC DC-4s if you really like the arms that much. That's what I have and they work good in the woods.

im down to 47 inches thats as narrow as its gonna get