Pro Armor Revolution Nerf Bars, Way Off Options

[pirri507]

Hey gang,

I just tried to install the pro armor revolution pro pegs nerf bars on my YFZ 450R, and could tell right away, THEY WERE WAY OFF FROM FACTORY....at first i almost send it back,,,but shipping was gonna be expensive so i fought with them for a long time at the end i had to put 1 side on the bending machine and get them straight put them back on,,,everything fine,,,but im too far from the heel guard bolt to the subframe on both sides,,,theres no way there will ever get there, maybe using longer bolts. But what a pain in the ass they been.

This post has been edited by pirri507: Sep 20 2009, 01:44 PM

[Advertisement]

[leveldrummer]

contact pro armor and tell them to cover shipping, you already payed for shipping once, and the screwed you, i wouldnt pay for it again. they should cover it.

[08yfz45031]

maybe they sent you the regular yfz450 ones? could that be possible

[gas it!!]

Its sounds like you talked to pro armor but......did you?

I have had problems with some of their stuff before but most of the time it was because I was installing the bard incorrectly.
They will fight you on it because they get calls like this all the time. What they need to do is send instructions. I've already told them this.

The thing is......they have a jig for nerf bars that they fit EVERY SINGLE NERF BAR to before its packaged for distribution. So they know that the stuff fits.

Make sure you are doing it right and then contact pro armor direct. They will make whatever is wrong right.

[Bowtie]

Make sure you are doing it right and then contact pro armor direct. They will make whatever is wrong right.

Very Very True. I bought a bumper off eBay and it was beat up when I got it. I contacted the seller who pawned me off directly to Pro Armor and I got set up with one of their reps. She paid to have the bumper sent back and shipped me a new one. Both of my PA heel guards broke the bracket that goes to the frame. Again, she paid to have them shipped back, and even though it took them a month, they shipped me brand new ones. One side still doesn't fit right, so they are making another set and they are going to ship those to me and pay for the ones I have to go back. Call them direct, and talk to them, they will make things right.

[REEDracing94]

one nice thing about pro armor is they will replace them and pay shipping back..also if you contact them they will resolve the design problem if they have enough people complain

[chim-chim7]

First time installing nerfs? You need to make sure that every single bolt is loose to almost the point of falling out. Once you get all the bolts in then tighten. If you happen to just tighten one bolt down, it will keep everything from fitting together. Start with the pegs, put both bolts in really loose. Move to the front of the nerf, slide in the front bolts, do not tighten. Then wrestle with the heel guard, the loose bolts provide just enough slop to get the heel guard bolts on place. Once you got them all in, tighten away. All nerf bars are a pain in the but. You have to use a little pressure here and there to get things to fit, nature of the beast. Good luck. I have a YFZ R and I also have the same nerf bars as you.

[YammyYFZ07]

If your pro armor nerfs just break and you have been useing them will they replace them or not ?? just wondering

[leveldrummer]

If your pro armor nerfs just break and you have been useing them will they replace them or not ?? just wondering

they might, they will probably want to see them though, i would call them and ask about it, how old are they?

[REEDracing94]

they should replace them...